s.A. SEMO GLASS MACHINES

 

SURFACE GRINDER S60

  1. Accurate assembly adapted to the use of diamond wheels

  2. Sturdy frame with a rigid structure

  3. Machined tool adaptor

  4. Wheel shaft diameter: 50 mm

  5. High quality ball bearings

  6. Power transmission by flat belt

  7. Machine designed for intensive use

  8. PVC work table

  9. Cooling water recovery tray

  10. Draining tray

  11. Electric motor (power: 4kW)

  12. Electronic speed variator (speed range: 300 to 1000 rpm)

  13. User-friendly design

STANDARD EQUIPMENT

OPTIONAL EQUIPMENT

TECHNICAL CHARACTERISTIC

The S60 is formed by a lower frame welded to a casing shape in order to offer optimal rigidity.The upper part is made of polypropylene (PP) for an agreeable contact, working silence and absence of oxidation. The machine configuration and external dimensions have been designed to enable a user-friendly working position.

In order to warranty a perfect function of the diamond abrasives with any bonding material, the surfacing wheel assembly is formed by a shaft (0 50 mm) guided by two highly accurate bearings optimally designed in order to be able to absorb high working stresses.The S60 has been designed for intensive work. A wide flat belt ensures a vibrationless power transmission.

An electronic speed variator adapter for an electronic progressive speed regulating between 300 and 1000 t./min. allows the use of the S60 in the optimal conditions according to the used abrasive and to the type of work. Characteristics :

Progressive speed regulation from 300 to 1000 rpm. Programmable acceleration and deceleration curve. Punctual power compensation. Magnetic motor braking.

  1. Accurate assembly adapted to the use of diamond wheels Low voltage light

  2. Stainless steel water (capacity: 400 liters) with recirculating pump

  3. Cerium oxide recirculation tray

  4. Device for automatic oscillation

  5. Diamond and polishing tools

  6. Cooling additive for the recirculation system

The compact work table may be equipped with tools 0 400,600 and 700 mm without penalizing the working comfort.

The lateral draining board facilitates the installation of large / heavy pieces and offers the possibility of storing articles almost achieved. The cooling water is sprayed using an easily adjustable hose. The quantity of cooling liquid is adjustable using an easily accessible valve.

An optional stainless steel recovery tray allows the use of our additives SD17, SD18, SD19, which have been developed especially for the lubrication of our diamond abrasives.

The tool holding adaptor is made of machined steel, for a high positioning accuracy.The compact dimensions of the S60 facilitate the tool change.The tray collects the cooling fluid. A PP stop bar enables end position work.

SEMO S.A.         BOULEVARD PRINCE HENRI 3A - LU-1724 LUXEMBOURG

                          SALES : 00 32 64 26 58 91

                          INFO@SEMOGLASS.COM